[1]郭隐犇,张青红*,李耀刚,等.可穿戴摩擦纳米发电机的研究进展[J].中国材料进展,2016,(2):011-15.[doi:10.7502/j.issn.1674-3962.2016.02.02]
　GUO Yinben,ZHANG Qinghong*,LI Yaogang,et al.Progress of the research on wearable triboelectric nanogenerator[J].MATERIALS CHINA,2016,(2):011-15.[doi:10.7502/j.issn.1674-3962.2016.02.02]
点击复制

可穿戴摩擦纳米发电机的研究进展()
分享到：

中国材料进展[ISSN:1674-3962/CN:61-1473/TG]

卷:
期数:
2016年第2期
页码:
011-15
栏目:
特约研究论文
出版日期:
2016-02-29

文章信息/Info

Title:
Progress of the research on wearable triboelectric nanogenerator
作者:
郭隐犇1; 张青红2*; 李耀刚2; 王宏志1*
1东华大学材料科学与工程学院,纤维材料改性国家重点实验室,
2东华大学材料科学与工程学院,先进玻璃制造技术教育部工程研究中心
Author(s):
GUO Yinben1; ZHANG Qinghong2*; LI Yaogang2; WANG Hongzhi1
1. State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University
2. Engineering Research Center of Advanced Glasses Manufacturing Technology, Ministry of Education, College of Materials Science and Engineering, Donghua University
关键词:
柔性可穿戴器件; 摩擦纳米发电机; 输出功率; 混合器件; 机械能
DOI:
10.7502/j.issn.1674-3962.2016.02.02
文献标志码:
A
摘要:
近年来，随着一系列柔性可穿戴器件概念的提出及产品的应用，人们发现如何为器件提供更加安全、方便、持续的能源成为一个亟需解决的问题。自从2012年摩擦纳米发电机(Triboelectric nanogenerator，TENG)被首次报导以来，由于其具有的质量轻、安全性高、清洁环保及可持续性等一系列优点，正在成为人们关注的焦点。TENG能够利用摩擦起电及静电感应原理将机械能转化为电能，利用这一特点，人们可以将行走、打字甚至呼吸、眨眼、心跳等机械能转化为电能继而对可穿戴器件持续稳定地供电。但是，TENG也存在着能量转化效率较低、输出功率不够高、脉冲式的电信号不够稳定等不足，这也成为TENG实际应用中的重大难题。本文将从材料种类、结构形貌以及混合器件这三个方面，综述近几年为提高TENG输出功率、稳定性等而进行的研究进展，详细分析不同因素对器件性能的影响。
Abstract:
Recent years, with the emergence and application of a series of conceptions and products of wearable electronics, it has become an urgent issue to power electronics in a safe, convenient and sustainable way. Since firstly reported in 2012, triboelectric nanogenerator (TENG) has been widely explored because of its light weight，high out-put performance, clean, sustainability, etc. The function of harvesting and transforming mechanical energy to electricity makes TENG a promising energy resource to power wearable electronic devices by turning walking, typing even breathing and blinking to electricity. However, the disadvantages of TENG are obvious: quite low conversion，low out-put performance and impulsive out-put voltage. All these shortcomings lead to a great challenge for the application of TENG. Therefore, to improve the out-put power density of TENG has become the key factor for its application in supporting wearable electronic devices. This paper focuses on the developments of the out-put performance and stability of TENG in recent years from three aspects: 1. Different kinds of materials; 2.Structure and morphology of materials; 3. Hybrid nanogenenators. The influence of different factors has been analyzed in details in this paper.
更新日期/Last Update: 2016-01-27