中国材料进展 过刊查询页面

    关键词中包括 properties 的文章

1 Research Advance in Preparation of Duplex Stainless Steel by Laser Powder Bed Melting Technology
潘万枫,李尚,张健,董选普,刘鑫旺,计效园,向红亮,曹华堂
2025年11 [969-983][Abstract](3142)[pdf 30133KB](2202)
2 Research Progress in Dual-Phase Multi-Principal Element Alloys
焦明白,安旭龙,张智博,常昊天,孙文文
2026年09 [899-909][Abstract](904)[pdf 22446KB](97)
3 Microstructure and Mechanical Properties of CuCrZr Prepared by LaserAssisted Cold Spraying
胡友芹,杨冠军,雒晓涛,李长久
2026年02 [145-154][Abstract](2184)[pdf 1663KB](1233)
4 Research on the Preparation and Properties of Ultra-Large Plate Width Titanium-Steel Composite Plate
吴江涛,王丁,黄杏利,张鹏辉,邹军涛
2026年03 [259-266][Abstract](2972)[pdf 12516KB](1521)
5 Research Progress on the Mechanical Properties Characterization Technology of Indentation Method
曹辉,刘畅,曹铁山,程从前,赵杰
2026年08 [776-785][Abstract](242)[pdf 6280KB](181)
6 Research Status of Graphene Reinforced Copper Matrix Composites
杜诚,孙长飞,翟振杰,白颖,陈聪
2026年04 [292-305][Abstract](3741)[pdf 19692KB](1141)
7 Effect of Solution Temperature on Impact Toughness of TA31 Titanium Alloy Sheet and Underlying Mechanism
李瑞,彭轩强,关蕾,李可尔,庞莲,王鼎春,陈威
2025年06 [523-529][Abstract](3114)[pdf 17874KB](2205)
8 The Influence of the Rolling Temperature on Through-Thickness Microstructures and Properties of TC4ELI Wide-Thick Plates
王立亚,杨柳,郑友平,康琴,吴静怡,钟勇
2025年06 [516-522][Abstract](3373)[pdf 22728KB](1923)
9 Microstructure Evolution and Mechanical Behavior Study of SiCf/SiC Composite Materials under High Temperature Media
杨晨曦,曹伟,黄宝庆,原红星,胡江波,廉铁江,王明珠
2025年02 [146-153][Abstract](4960)[pdf 18018KB](2512)
10 Study on Microstructure and Properties of Wire Arc Additive Manufactured SnSb8Cu4 Alloy
周吉发,王蒙,李宁波,贾飞,赵丹,励乾民,程战
2026年03 [251-258][Abstract](2428)[pdf 16506KB](1435)
11 Innovative Design and Future Development of Chemically Complex Intermetallic Compounds
甘杰,周子修,肖博,周英豪,杨涛
2025年01 [15-30][Abstract](4084)[pdf 20095KB](3251)
12 Research Progress on Nanoprecipitation-Strengthened High-Entropy Alloys
郭嘉鸣,倪冰雨,焦增宝
2025年01 [31-39][Abstract](3861)[pdf 9363KB](3406)
13 Microstructure and Properties Evolution of GH2909 Low Expansion Superalloy During the Heat Treatment Process
闵慧娜,张宇,卢熠,赵兴东,赵佳航,王建国2
2026年01 [66-74][Abstract](2067)[pdf 29908KB](1479)
14 Effect of Forging Temperature and Deformation on Microstructure and Mechanical Property of Ti65 Alloy
刘秀良,王海丰,商国强,车安达
2024年第11期 [1043-1050][Abstract](3439)[pdf 9102KB](3043)
15 Effect of Rolling Temperature on Microstructure and Properties of Ti650 High Temperature Titanium Alloy Bar
钱坤,张国君,王晓,辛社伟,周伟,侯红苗
2026年01 [58-65][Abstract](2266)[pdf 18022KB](1573)
16 Review on H13 Steel for Hot Work Mold Fabricated via Laser Powder Bed Fusion
杨国煜,吝放,王金悦,万杰,邓彦超,李进步,陈豫增
2025年12 [1083-1099][Abstract](2860)[pdf 45525KB](1831)
17 Research Progress on Densification Technology for Carbon Materials
高凤,张皓伟,崔正威,袁观明,许斌
2025年12 [1069-1082][Abstract](1629)[pdf 26032KB](1415)
18 Advances in Biomass-Derived Porous Carbon Architecture for CO2 Capture
钟安定,虞育杰,黄睿,魏星名,刘建洪,郑永鑫
2025年08 [710-719][Abstract](3108)[pdf 10665KB](1440)
19 Graphene/Ti Interface Alloy Elements Aggregation and Interfacial Reaction Inhibition Mechanism
陈佳莹,熊小倩,黄敬涛,曲囡,李明伟,程源,来忠红,刘勇,朱景川
2024年第03期 [222-228][Abstract](4222)[pdf 4527KB](2726)
20 Effect of Annealing on the Microstructure and Corrosion Resistance Properties of Ni50Nb14Ta14P9Fe13 Amorphous Alloy
苏铭滨,何波,倪黎,贺勇,周亮,张新富,刘伟,陈吉
2025年07 [629-635][Abstract](2875)[pdf 11353KB](1719)
21 Research Progress on the Preparation, Microstructure and Mechanical Properties of Metal/High-Entropy Alloy Nanostructured Multilayers
高瑞泽,王亚强,张金钰,吴凯,刘刚,孙军
2024年第01期 [12-23][Abstract](3586)[pdf 11376KB](2891)
22 Recent Progress in Studying the Interfacial Structure and Properties of Graphene-Reinforced Metal Matrix Composites
杨昌一,吴舒凡,肖文龙,马朝利
2024年第03期 [195-211][Abstract](4896)[pdf 2262KB](4598)
23 Research Progress in Deformation Mechanism and Machining Technology of β-Ga2O3 Single Crystal Substrates
杨冉,金竹,马可可,夏宁,张辉,杨德仁
2025年02 [199-208][Abstract](2368)[pdf 6231KB](2265)
24 Progress of TiO2 with Oxygen Vacancies Composites in Sodium-Ion Batteries
周烽海,李伟,王绍聪,吕奕菊,刘峥
2025年10 [945-953][Abstract](2113)[pdf 13611KB](1352)
25 Research Progress on Creep Properties of Ni-Base Crystalline Superalloys
李聪,刘旭,任延杰,刘轩,李微,陈荐,陈维
2025年04 [360-372][Abstract](2756)[pdf 28024KB](1850)
26 Preparation of Room-Temperature Healable Polyurethanes Based on Synergistic Hydrogen Bonds/Disulfide Bonds and Study on Their Properties
童永仲,潘绍武,朱美芳
2024年第07期 [658-665][Abstract](2808)[pdf 8624KB](2444)
27 Physical and Mechanical Properties of Cryogenic High Manganese Austenitic Steel
张书畅,王红鸿,成志超,彭思远,张富伟,李晓晨
2024年第12期 [1138-1144][Abstract](4326)[pdf 6856KB](2505)
28 Study on Heat Treatment Process and Mechanical Properties of Ti-13Nb-13Zr Alloy for Dental Restoration
石晓艳,侯峰起,罗锦华,周文昊,王大友,贾庆功,袁思波,唐蔚,胡明扬
2025年05 [505-512][Abstract](2462)[pdf 20178KB](1983)
29 Research Progress of Rare Earth Hydrogen Storage Materials
苑慧萍1, 2, 3,李志念1, 2, 3,沈浩1, 2, 3,蒋利军1, 2, 3
2023年第02期 [98-104][Abstract](6562)[pdf 2644KB](4761)
30 Application of Transmission Electron Microscope in Thermoelectric Materials
张成龙1,李姝蓉1,武海军1,何佳清2
2022年第12期 [1042-1048][Abstract](5841)[pdf 13861KB](3491)
31 Preparation and Hydrogen Storage Properties of Li-Al-B-H Composites
罗辉,王新春,陶小马,黄存可,蓝志强,周文政,郭进,刘海镇
2023年第01期 [39-45][Abstract](5862)[pdf 8203KB](3806)
32 Friction Stir Processing on Fusion Welding Area of 7075 Aluminum Alloy
张云龙,李若琳,朱彬,程亮
2023年第02期 [174-180][Abstract](3629)[pdf 31051KB](2808)
33 Characterization of Thermoelectric Properties
郑欣,韩屾,高梓恒,付晨光,朱铁军
2022年第12期 [1018-1028][Abstract](6032)[pdf 10925KB](3320)
34 Investigation on Phase Structure and Hydrogen Storage Properties of La-Mg-Ni-Based A2B7-Type Alloys
李媛,陈康莉,王文凤,张璐,韩树民
2023年第01期 [30-38][Abstract](6695)[pdf 4919KB](6102)
35 Microstructure Regulation and Thermoelectric Properties of SnTe
郭逢凯,蔡伟,隋解和
2022年第12期 [979-989][Abstract](5400)[pdf 21025KB](3057)
36 Research Progress on Microstructure and Mechanical Behavior of CoCrFeMnNi High-Entropy Alloy
谢马冲,杨 坤,李来平
2024年第07期 [627-636][Abstract](3945)[pdf 20955KB](2579)
37 Performance Optimization of Bismuth Telluride Thermoelectric Materials and Its Application in Waste Heat Recovery of Ships
杨立泽1,周云1,张德2,周小元2
2022年第12期 [1049-1054][Abstract](4750)[pdf 3085KB](3575)
38 Effect of Heat Treatment on Microstructure and Properties of Ti2 AlNb Alloy Fabricated by Selective Electron Beam Melting
李会霞1, 车倩颖1, 贺卫卫1,2, 向长淑1,2, 程康康1, 王 宇1
2023年第06期 [499-505][Abstract](4357)[pdf 15932KB](3085)
39 Research Progress on Polymer Assisted Metal Deposition
赵治,王悦,田坤卉,单宇鹏,宋晓艳
2022年第08期 [589-600][Abstract](4661)[pdf 20402KB](3032)
40 Research Progress of the Portevin-Le Chatelier Effect in Aluminum Alloy
刘子轩,张鹏,刘刚,孙军
2023年第10期 [787-795][Abstract](4251)[pdf 7599KB](5984)
41 Effect of Heat Treatment on Microstructure and Mechanical Properties of High Strength Titanium Alloy
王富强1, 张瑞雪2, 杨立新1, 王晓巍1, 马英杰3, 黄森森3, 雷家峰3
2023年第05期 [415-420][Abstract](4443)[pdf 19748KB](3114)
42 Progress in Additive Manufacturing of Ti6Al4V-Based Composites
王琪,李智,张海军,刘江昊
2023年第05期 [375-390][Abstract](3528)[pdf 22814KB](2899)
43 Research Progress on Composition Design of Novel Cobalt Based Superalloy
张旭明,马庆爽,张海莲,毕长波,张会杰,李会军,高秋志
2024年第03期 [229-237][Abstract](4642)[pdf 12966KB](2642)
44 Effect of Modification of Potassium Titanate Whisker on Properties of Non-Asbestos Gaskets
田健博1,李遇贤1,刘美红1,刘卓鑫1,林海琳2
2023年第07期 [591-596][Abstract](2495)[pdf 8150KB](2089)
45 Preparation and Performance Analysis of 3D Printing Continuous Carbon Fiber Prepreg
李慧斌1,刘玉君1,汪骥1,2,3,李瑞1,刘晓 1
2023年第03期 [260-265][Abstract](6660)[pdf 12585KB](3698)
46 Research Progress of Aluminum-Tin Alloy
孔令明1,2,阚洪敏1,2,陈硕1,2,王晓阳1,2,龙海波1,2
2023年第10期 [840-846][Abstract](3323)[pdf 1598KB](3275)
47 Advances in Application of Precursor Polymers in Ceramic Additive Manufacturing
王特特,王飞,何博
2023年第09期 [759-768][Abstract](3727)[pdf 12088KB](2445)
48 Research Progress in Squeeze Casting Magnesium Alloys
贾海龙,张梦娜,杨铭,赵磊,查敏,王慧远
2021年第10期 [772-784][Abstract](5964)[pdf 30523KB](4489)
49 Current Status and Development of Functional Modification Technology of Glass Surface
王浩博,李传强
2022年第08期 [635-644][Abstract](4643)[pdf 3716KB](3668)
50 Progress in Preparation and Properties of Hollow Spheres and Their Composites
果春焕1, 邵帅齐1, 牛建民2, 姜风春1,3, 张智超1, 张瑞鹏1, 张贺新1
2023年第06期 [482-491][Abstract](4193)[pdf 5450KB](5064)
51 Machine Learning Prediction Model for Microstructure-Tensile Properties Relationship of Superalloys
刘芳宁,王越,孙瑞侠
2022年第11期 [938-946][Abstract](5743)[pdf 9915KB](3183)
52 Research Progress of Ti2AlNb Based Alloy and Its Additive Manufacturing Technology
霍俊美1,2,何博1,2
2022年第08期 [645-652][Abstract](6410)[pdf 6865KB](4179)
53 Effect of Flame-Retardant Fillers on Properties of Ceramicized Refractory Silicone Rubber
普庆
2022年第10期 [864-868][Abstract](4088)[pdf 11185KB](2872)
54 High Frequency Electromagnetic Properties of FeCoSi Magnetic Powders via Phosphorization
陈起明,周晨晖,严 密,吴 琛
2021年第03期 [161-166][Abstract](6529)[pdf 3160KB](3924)
55 Research Progress of CrCoNi-Based Multi-Component Alloys
潘云炜,董安平,杜大帆,周阳,何林,李仲杰,汪东红,疏达,祝国梁,孙宝德
2021年第04期 [241-250][Abstract](7119)[pdf 6853KB](4663)
56 Lubrication and Failure Mechanism of MoS2-based Bonded Solid Lubricating Coatings on Zirconium Alloy Surface
高原1,2,王一童1,王庆娟1,王伟1,王岩1,王强1
2021年第11期 [911-916][Abstract](4703)[pdf 11291KB](3362)
57 Research Progress on Engineering Application of Ti-6Al-4V Alloy Fabricated by Selective Electron Beam Melting Process
汤慧萍
2020年第7-8期 [551-557][Abstract](7890)[pdf 15831KB](4496)
58 A New Type Extra-High Strength and Medium Toughness Titanium Alloy of Ti-1500
辛社伟1,周伟1,李倩1,张思远1,杨健2,赵永庆1,毛小南1,王雪元2
2021年第06期 [441-445][Abstract](7163)[pdf 6174KB](4580)
59 Recent Progress on Low-Carbon MgO-C Refractories
朱天彬,李亚伟,桑绍柏
2020年第7-8期 [609-617][Abstract](6153)[pdf 17205KB](4627)
60 Development Status and Tendency of Functional Packaging Materials
李慧玲,徐长妍,蒋少华*
2019年第12期 [1135-1144][Abstract](8767)[pdf 1578KB](7423)
61 Research Progress in Preparation and Nonlinear Optical Properties of Black Phosphene
朱宝华,曹秀华,陈艳,金宁,顾玉宗,赵辛未
2019年第12期 [1193-1198][Abstract](7261)[pdf 1774KB](5314)
62 Research Progress of Metallic Hollow Sphere Composites
于天淼1,高华兵2,王春鹤1,范琦琪1,曹梦馨1,姜风春1,果春焕1
2019年第11期 [1102-1112][Abstract](8114)[pdf 1135KB](5928)
63 Research on the CuNb Microcomposites Reinforced by Graphene
王鹏飞1,2,梁明2,徐晓燕2,金利华2,冯建情2,李成山2,李金山1,张平祥1,2
2019年第11期 [1082-1085][Abstract](8717)[pdf 1475KB](5542)
64 Data-Driven Designing of Microstructures and Properties of Magnesium Alloys
曾小勤,谢天,应韬,朱虹,刘言伟,王乐耘,丁文江
2020年第1期 [1-11][Abstract](7793)[pdf 11147KB](5849)
65 Development of Finite Element Modeling Technique for Metal Matrix Composites with Tailored Architectures
高翔1,2,张学习1,钱明芳1,李爱滨1,耿林1,彭华新2
2020年第06期 [437-449][Abstract](7916)[pdf 25751KB](5467)
66 Progress on Carbon Fiber Reinforced UltraHigh Temperature Ceramic Matrix Composites
陈小武,董绍明,倪德伟,阚艳梅,周海军,王震,张翔宇,丁玉生
2019年第09期 [843-854][Abstract](10265)[pdf 25270KB](5798)
67 Research Progress of Refractory High-Entropy Alloys
刘张全,乔珺威
2019年第08期 [768-774][Abstract](9685)(2995)
68 Research Progress and Prospect of Electron Beam Freeform Fabrication
李绍伟1,郜庆伟1,赵健1,2,3,柳洪文3,王朋飞3,于治水1
2021年第02期 [130-138][Abstract](10093)[pdf 3803KB](5862)
69 Review of Quenching-Partitioning-Tempering (QPT) Steels
黎雨,李伟,金学军
2019年第07期 [631-640][Abstract](9832)[pdf 15322KB](6499)
70 Material Database and Application Status of Data Mining Technology
杨 丽13,苏 航12,柴 锋1,罗小兵1,段琳娜12
2019年第07期 [672-681][Abstract](9296)[pdf 4774KB](6279)
71 High-Throughput Calculation and Design of Special Steel
王晨充,魏晓蓼,沈春光,徐 伟
2019年第07期 [663-671][Abstract](9456)[pdf 7864KB](6178)
72 Research progress on joining of ceramic reinforced titanium matrix composites
许文龙12,张相召1,杨露瑶1,刘桂武1
2019年第07期 [696-704][Abstract](8136)[pdf 8502KB](5733)
73 Research Progress on NanoAl2O3 Reinforced Metal Matrix Composites
马思源,郭强,张荻
2019年第06期 [577-587][Abstract](7860)[pdf 12817KB](6396)
74 Research Progress of MultiSystem Glasses and Glass Ceramics Containing TiO2 and Their Optoelectronic Applications
刘孝芬1,肖永川2,孙力军2,陈阳1,娄阳1,戴能利1,李进延1
2020年第06期 [464-471][Abstract](6425)[pdf 6842KB](4352)
75 Crystallization Behavior and Mechanical Properties of Bio-based Polyhydroxyalkanoates
相恒学,曾佳,陈姿晔,周哲,朱美芳
2019年第05期 [450-456][Abstract](9038)[pdf 4779KB](5859)
76 Optical Absorption Properties and Nanostructures of Self-Assembled Block Copolymer/Nanoparticle Hybrids

刘早锦,许占文,林嘉平
2019年第05期 [433-439][Abstract](7249)[pdf 8037KB](5011)
77 Effect of High Temperature Service on Microstructure and Properties of HP40Nb Furnace Tube Joint
李松林1,曹逻炜2,韩志远2,程方杰1,3
2020年第2期 [133-137][Abstract](6747)[pdf 11797KB](5607)
78 Effects of Microstructure on the Quasi-Static and Dynamic Compression Properties of TC21 Titanium Alloy


杨红斌,李萌蘖,卜恒勇


2019年第02期 [183-186][Abstract](6455)[pdf 5747KB](5119)
79 Effect of T6 Heat Treatment on the Interfacial Microstructure and Mechanical Properties of A356/6082 Aluminum Alloy Composite Plate


董澎源1,李元东1,2,李明1,杨世杰1,李嘉铭1


2019年第02期 [177-182][Abstract](6733)[pdf 8774KB](6050)
80 Progress in Powder Metallurgical Brake Materials for HighSpeed Trains
姚萍屏,肖叶龙,张忠义,周海滨,贡太敏,赵林,邓敏文
2019年第02期 [116-125][Abstract](7528)[pdf 8296KB](6676)
81 Progress in Proton Irradiation of Reactor Pressure Vessel Steels
李承亮1,吴昊2,刘飞华1,晏井利2
2019年第02期 [138-147][Abstract](8352)[pdf 7915KB](5828)
82 Progress in Preparation and Adsorption Properties of Nano-Cellulose Based Aerogel
朱文凯,张洋,徐欢,任梓瑞,王晓宇,张天蒙,季美秀
2020年第04期 [304-314][Abstract](9026)[pdf 19966KB](4880)
83 Progress in Research of Graphene Nanocomposite Fibers
张媛媛,程群峰
2019年第01期 [49-57][Abstract](8662)[pdf 8395KB](7126)
84 Influence of Hot Die Deformation Rates on Microstructure and Mechanical Properties of TC18 Titanium Alloy
王华
2018年第11期 [51-55][Abstract](7939)[pdf 10915KB](5700)
85 Advances in Graphene-Based Microwave Absorption Materials
康帅,乔士亚,胡祖明,于俊荣,王彦,诸静
2020年第1期 [61-70][Abstract](8195)[pdf 4639KB](4510)
86  “Couple Hardness with Softness”-Viscoelastic Smart Materials with Magnetic-sensitive Characteristics
余 淼
2018年第10期 [26-30][Abstract](7363)[pdf 16093KB](4817)
87 Research Progress on Soft Magnetic Composites
吴琛,严密
2018年第8期 [20-27][Abstract](9033)[pdf 8638KB](6463)
88 esearch Progress on Electromagnetic Wave Absorption Properties of Carbon Materials
黄巨龙,周 亮,陈 萌,梁梦妍
2020年第2期 [138-145][Abstract](7352)[pdf 4335KB](5049)
89 Research Progress in Ultra-high Temperature Oxide Eutectic Composite Ceramics
苏海军,王恩缘,任 群,张 军,刘 林,傅恒志
2018年第06期 [11-15][Abstract](9705)(6)
90 The progress and outlook of W-ZrC alloy as plasma facing component
张涛,吴学邦,谢卓明,李祥艳,刘瑞,王先平,方前锋,刘长松
2018年第05期 [1-10][Abstract](11243)[pdf 19056KB](6479)
91 Key Material Genome of Titanium Alloys and Application of High Throughput Experiment and Computation
孙巧艳1,杜勇2,刘立斌2,胡青苗3,肖林1,孙军1
2018年第04期 [57-63][Abstract](8121)[pdf 3292KB](6410)
92 Research Progress on the Effect of Welding Process on Weld Geometry and Joint Properties of Stainless Steel Sheet
栗卓新1,王宁1,TILLMANN Wolfgang2
2018年第3期 [71-76][Abstract](7412)[pdf 2352KB](5489)
93 Investigation of Microstructure and Properties of TC4 Alloy Using Electron Beam Cold Hearth Melting
唐增辉1,辛社伟2,洪权2,毛小南2,张志斌1,周伟2,李倩2,杜彬1,周武1
2018年第3期 [44-49][Abstract](9199)[pdf 4649KB](6194)
94 Modification of Graphene Oxide and Its application in Silicone Rubber


王华兰1,*,刘日胜1,胡应乾1,邬继荣1,张国栋1,周旭峰2,刘兆平2
2018年第3期 [37-43][Abstract](8176)[pdf 3869KB](5727)
95 Research development of polysiloxanes with special topologies
李泽,汪旭红,郝超伟,杨雄发,来国桥
2018年第3期 [1-7][Abstract](8791)[pdf 4498KB](5136)
96 Research Status and Prospect of Sc Microalloying Aluminum Alloys
周民1,甘培原1,邓鸿华1,詹海鸿1,刘晨1,曾建民2
2018年第02期 [51-55][Abstract](8817)[pdf 1722KB](5180)
97 Novel Material Research using Containerless Processing
王  伟,张明辉,汪超越,贺  欢,潘秀红,李  勤,余建定
2017年第12期 [16-20][Abstract](8781)[pdf 5690KB](6455)
98 Thermophysical Properties and Glass Transition of Metallic Glass Formers under Microgravity
闻  平,王彬彬,丁大伟,赵德乾,汪卫华
2017年第12期 [6-10][Abstract](8007)[pdf 4871KB](5801)
99 Tuning of In-plane Uniaxial Magnetic Anisotropy and the Microwave Properties in Soft Magnetic Metallic Thin Films 

 

徐展,张志,胡芳,徐锋

2017年第9期 [6-10][Abstract](7616)[pdf 4037KB](5097)
100 Research Progress of Lead-Free Piezoelectric materials
朱秀,许桂生,刘锦峰
2017年第4期 [21-25][Abstract](8491)[pdf 3005KB](6494)
101 Research on Bismuth Telluride Based Thermoelectric Semiconductor Crystals
李小亚,陈炎,郝峰,包晔峰,陈立东
2017年第4期 [270-278][Abstract](12090)[pdf 4524KB](11178)
102 Research on Microstructure and Mechanical Properties of 5182 Aluminium Alloy with Surface Mechanical Attrition Treatment
徐颖宣,孟祥晨,李 根,金 斌,盖炳君,谢庭祯,刘 勇,吕 坚
2017年第2期 [36-40][Abstract](12364)[pdf 1883KB](7557)
103 Research Advances on Mechanical Property Improvement of Engineering Ceramic Joints
何鹏,冯青华,林铁松,Dusan P Sekulic
2017年第2期 [31-35][Abstract](9435)[pdf 4925KB](6827)
104 Research and Development of Orthorhombic Titanium Aluminide
杜  刚,崔林林,雷强,杜玉俊,齐锐,王玮东,付宝全
2018年第01期 [68-73][Abstract](6822)[pdf 1592KB](5997)