[1]栗卓新,张天理,Kim H J.低合金高强钢焊缝金属中AF的研究进展[J].中国材料进展,2012,(1):050-55.[doi:10.7502/j.issn.1674-3962.2012.01.08]
　LI Zhuoxin,ZHANG Tianli,Kim H J.Research Progress on AF in Weld Metal for HSLA Steel[J].MATERIALS CHINA,2012,(1):050-55.[doi:10.7502/j.issn.1674-3962.2012.01.08]
点击复制

低合金高强钢焊缝金属中AF的研究进展()
分享到：

中国材料进展[ISSN:1674-3962/CN:61-1473/TG]

卷:
期数:
2012年第1期
页码:
050-55
栏目:
研究报告
出版日期:
2012-01-25

文章信息/Info

Title:
Research Progress on AF in Weld Metal for HSLA Steel
作者:
栗卓新; 张天理; Kim H J
 (1. 北京工业大学材料科学与工程学院，北京 100124)
 (2. 韩国工业技术研究院高级熔焊研究组，天安 330-825)
Author(s):
LI Zhuoxin1;  ZHANG Tianli1;  Kim H J2
 (1. The College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China)
 (2. Advanced Joining Research Team, Korea Institute of Industrial Technology, Cheonansi 330-825, Korea)
关键词:
低合金高强钢; 针状铁素体; 合金元素; 夹杂物; 热输入
DOI:
10.7502/j.issn.1674-3962.2012.01.08
文献标志码:
A
摘要:
综述了国内外对于低合金高强钢(HSLA，High Strength Low Alloy)焊缝金属中针状铁素体(AF，Acicular Ferrite)的最新研究进展得出，要想获得较多的AF，主要从3个方面加以有效控制：① 合金元素中含005%~010% C，且C当量小于039，合理控制Mn，Ni，Ti，B之间的相互比例，保持硼氮比(B/N)在06~08之间，铝氧比(Al/O)在043~073之间，降低N，S，P含量；② 夹杂物尺寸为05~08 μm，表面富10~20 nm TiO薄层且呈球形，促使生成更多的第Ⅲ、Ⅳ类夹杂物；③ 较低热输入(HI， Heat Input)时合金元素烧损较少，冷却速率较快，焊缝组织得以细化。
Abstract:
This paper reviews the newest worldwide research progress on acicular ferrite (AF) in weld metal for high strength low alloy (HSLA) steel. More AF can be mainly obtained by the effective control of three aspects: ① when C content is between 005 and 010% with a carbon equivalent of less than 039, the ratios between Mn, Ni, Ti, and B can be reasonably controlled, and the ratio of B/N is between 06 and 08, Al/O is between 043 and 073, while N, S, P contents are reduced; ② when the size of inclusion is in the range of 05~08 μm with 10~20 nm TiO in the inclusion surface and with its shape being globular, then more third and fourth types of inclusions can be obtained;
更新日期/Last Update: 2012-02-09