<span style="FONT-FAMILY: Arial">自组装合成表面包覆壳聚糖的碳微球</span>-中国材料进展

文章信息/Info

作者:: 韩艳星; 刘伟峰; 杨永珍; 刘旭光; 许并社; 1太原理工大学新材料界面科学与工程教育部重点实验室，山西太原 030024
2太原理工大学化学化工学院，山西太原 030024
3太原理工大学材料科学与工程学院，山西太原 030024

Author(s):: HAN Yanxing; LIU Weifeng; YANG Yongzhen; LIU Xuguang; XU Bingshe; (1 Key Laboratory of Interface Science and Engineering in Advanced Materials,Ministry of Education,Taiyuan University of Technology,Taiyuan 030024,China)
(2 College of Chemistry and Chemical Engineering,Taiyuan University of Technology,Taiyuan 030024,China)
(3 College of Materials Science and Engineering,Taiyuan University of Technology,Taiyuan 030024,China)

摘要:: 采用静电自组装实现了壳聚糖（CS）对碳微球（CMSs）的包覆。将化学气相沉积法制得的CMSs用HNO3和H2O2混合溶液进行表面氧化修饰，引入含氧官能团，使其表面带负电，通过静电作用力与带正电的CS自组装，从而改变了CMSs的表面活性。利用场发射扫描电子显微镜、傅立叶红外光谱仪、X-射线衍射仪及热重分析仪等检测手段表征了产物的形貌和结构特征。结果表明：CS成功地组装到CMSs表面，当CMSs与CS的质量比为1∶2时，CS均匀覆盖于CMSs表面，而且在水溶液和乙醇中的分散性较好。

Abstract:: Carbon microspheres (CMSs) covered with chitosan (CS) was performed by electrostatic self assembly.CMSs,which were synthesized by chemical vapor deposition,were firstly oxidized by a mixture of concentrated HNO3 and H 2O 2,thus changing the surface activity of CMSs by electrostatic interaction between CMSs with negative charge and CS with positive charge.The morphologies and microstructures of the products were characterized by field emission scanning electron microscopy,Fourier transformation infrared spectrometry,X ray diffraction,and thermogravimetry.The results indicate that CS was self assembled on the surface of CMSs.When the mass ratio of CMSs to CS was 1∶2,the surface of CMSs was uniformly covered with CS and dispersion in water and ethanol was improved.