参考文献/References:
[1]Flemings M C, Cahn R W. Orgnization and trends in material science and engineering education in US and EUROPE[J]. Acta Mater, 2000, 48(1):371-383.
[2] Du Shanyi(杜善义). 先进复合材料与航空航天[J]. Acta Materiea Compositea Sinica(复合材料学报), 2007, 24 (1):1-12.
[3] Robert Ian M. Advanced composite structures research in Australia[J]. Composite Structures, 2002, 57(4):3-10.
[4] Yang Naibin(杨乃宾), Liang Wei(梁伟). 大型民机机体结构用复合材料分析[J]. Aeronautical Manufacturing Gechnology(航空制造技术), 2009, (5):68-70.
[5] Yang Naibin(杨乃宾). 国外复合材料飞机结构应用现状分析[J]. Aeronautical Manufacturing Gechnology(航空制造技术), 2002, (9):21-29.
[6] He Fu(贺福),Sun Wei(孙微). 碳纤维复合材料在大飞机上的应用[J]. Hi-tech Fiber & Application(高科技纤维与应用), 2007, 32(6):5-10.
[7] Wu Renjie(吴人洁). 日本碳纤维概况[J]. China Synthetic Fiber Industry(合成纤维工业), 1982,5:20-30.
[8]Bi Hongzhang(毕鸿章). 东丽向丰田供给汽车用碳纤维[J]. Hi-tech Fiber & Application(高科技纤维与应用), 2010, 35(6): 61-62.
[9] Taylor C. PNGV vehicle engineering accomplish- ments[J]. Automotive Engineering Interna tional, 1996, 104(11):93-94.
[10] D T D S. A vehicle for change PNGV, an
experiment in government industry cooperation[D]. Santa Monica: Pardee RAND Graduate School. 2009.
[11] H. Adam. Carbon fibre in automotive applications[J]. Materials & Design, 1997, 18(4):349-55.
[12] Kwang-woo J, Kwang-bok S, Jung-seok K. Evaluation of Tension-Compression and Tension-Tension Fatigue Life of Woven Fabric Glass/EpoxyLaminate Composites used in Railway Vehicle[J]. International Journal of Precision Engineering and Manufacturing, 2011, 12(5): 813-20.
[13] Li Jixuan(李积轩).美国新的燃油标准将拉动汽车轻质材料的应用[J]. Automobile & Parts Technology(汽车与配件), 2008,(2):44-46.
[14] Wang Zhiwen(王智文). 汽车轻量化技术发展现状初探[J]. Automotive Technology & Material(汽车工艺与材料), 2009,(2):1-6.
[15] Lu Chunyan(鲁春艳).汽车轻量化技术的发展现状及其实施途径[J]. ShangHai Auto(上海汽车), 2007, (6):28-31.
[16] Pam, Mike Brady. Automotive composites: the search for efficiency, value and performance[J]. Reinforced Plastics, 2007, (11):26-29.
[17] Zhao Jiaxiang(赵稼祥).2008世界碳纤维前景会[J]. Hi-tech Fiber & Application(高科技纤维与应用), 2008, 33(5):1-6.
[18] Chu Dongning(褚东宁),Feng Meibin(冯美斌),Wang Yong(王 勇). 未来汽车业的发展与材料技术[J]. Automotive Technology & Material(汽车工艺与材料), 2011, ( 2):39-44.
[19] Yang Yanping(杨沿平), Tang Jie(唐杰). 我国汽车轻量化技术现状及研发重点[J]. Automobile & Parts Technology(汽车与配件), 2006, 42(20):20-22.
[20] SH. Pourmostadam. A Research Study on the Production of Advanced High Strength Steels to Heavy Chassis of FH 12 Applied in Auto Structural parts. Materials Science and Technology(MS&T) 2006:Materials and Systems[C]. Cincinnati, Ohio. 2006.
[21] Zhu Xiaodong, Ma Zhaohui, Wang Li. Development and Application of Advanced High Strength Sheet Steel for Auto-making. World Engineers Convention 2004 vol G: Ecological Material and Green Manufacturing[C]. Shanghai, 2004:102-106.
[22] Wang Guangyong(王广勇)Wang Gang(王刚).高强度钢在汽车轻量化中的应用[J]. Automotive Technology & Material(汽车工艺与材料)[J] , 2011,(1):1-5.
[23] Li Jianjun(李建军),Qiu Ranfeng(邱然锋). 汽车车身用高强度钢及其加工性能的探讨[J]. Automotive Technology & Material(汽车工艺与材料), 2010, 2: 49-52.
[24] Guan Shaokang(关绍康),Yao Bo(姚波),Wang Yingxin(王迎新). 汽车铝合金车身板材的研究现状及发展趋势[J]. Materials for Mechanical Engineering(机械工程材料), 2001, 25 (5): 12-14.
[25] Adam H. Carbonfibre in automotive applications[J]. Materials & Design, 1997, 18(4-6): 349-355.
[26] Society of Automotive Engineers of China(中国汽车工程学会).Trace Research on World Automotive Technology Development(世界汽车技术发展跟踪研究)[M]. Bei Jing(北京):Bei Jing Institute of Technology Press(北京理工大学出版社),2006:64–65.
[27] Wang Dong Chuan(王东川),Liu Qizhi(刘启志),Ke Feng(柯枫). 碳纤维增强复合材料在汽车上的应用[J]. Automotive Technology & Material(汽车工艺与材料), 2005, (4): 33 - 36.
[28] http://www.cnfol.com.
[29] http://hivocomp.eu.
[30] J. Verrey, M.D. Wakeman, V. Michaud, J.-A.E. Manson. Manufacturing cost comparison of thermoplastic and thermoset RTM for an automotive floor pan[J]. Composites: Part A, 2006, 37(1): 9–22.
[31] Zhao Jiaxiang(赵稼祥).碳纤维复合材料在汽车工业的应用.Carbon Techniques(碳素技术), 2003(3) :18-22.
[32] http://www.uscar.org/pngv/.
[33] M. E. Botkin. Structural optimization of automotive body components based on parametric solid modeling[J]. Engineering with computers. 2002,18(2):109-15.
[34] Zhao Qusen(赵渠森). Advanced Composite Materials Handbook: Digital manufacturing technology(先进复合材料手册: 数字化制造技术)[M]. Bei Jing(北京): China Machine Press (机械工业出版社),2003.29-31.
[35] Mohan R V, Tamma K K, Shires D R, et al. advanced manufacturing of large scale part process modeling manufacturing simulation and paralles computing platforms[J]. Advances in Engineering Software, 1998, (29): 249-263.
[36] Corum JM, et al. Durability-based design criteria for a choppedglass-fiber automotive structural composite[R]. Report ORNL/TM-1999-182, Oak Ridge, TN, Oak Ridge National Laboratory, 1999.
[37] Corum JM, et al. Durability-based design criteria for a chopped glass-fiber automotive structural composite[J]. Composite Science and Technology, 2001, 61(8):1083 – 95.
[38] Corum JM, et al. Durability-based design properties of reference crossply carbon-fiber composite[R]. Report ORNL/TM-2000/322, Oak Ridge, TN, Oak Ridge National Laboratory, 2001.
[39]Corum JM, et al. Durability-based design criteria for a quasi isotropic carbon-fiber automotive composite[R]. Report ORNL/TM- 2002/39, Oak Ridge, TN,Oak Ridge National Laboratory, 2002.
[40] Corum J M, Battiste R L, Ruggles-Wrenn M B. Low-energy impact effects on candidate automotive structural composites[J]. Composites Science and Technology. 2003, 63(6): 755-769.
[41]Shen Hao(沈浩),Chen Changming(陈昌明),Yao Xiaodong(姚晓冬)等.客车车身轻量化分析[J]. Bus technology and research(客车技术与研究),2003, (3):8一10.
[42] Gui Liangjin(桂良进),Zhou Changlu(周长路),Fan Zijie(范子杰).某型载货汽车车架结构轻量化设计[J].Automotive Engineering(汽车工程), 2003, (4):403-06.
[43] Zhu Shifeng(朱士风),Song Qifeng(宋起峰).CA1092车身轻量化的研究[J]. Automotive Technology & Material(汽车工艺与材料), 2002, (8/9):58-62.
[44] H. Adam. Carbon fibre in automotive applica tions[J]. Materials & Design, 1997, 18(4/6):349-55.
[45] Pillai KM, Advani SG. A model for unsaturated flow in woven fiber preforms during mold filling in resin transfer molding[J]. J Compos Mater, 1998, 32(19):1753-83.
[46] Schell JSU, Deleglise M, Binetruy C, Krawczak P, Ermanni P. Numerical prediction and experimental characterisation of meso-scale-voids in liquid composite moulding[J]. Composite: Part A, 2007, 38(12):2460-70.
[47] Comas-Cardona S, Ziaee S, Advani SG. Spatially homogeneous gelation in liquid composite molding[J]. Polym Eng Sci, 2002,42(10):1667-73.
[48]Deleglise M, Grognec P L, Binetruy C, et al. Modeling of high speed RTM injection with highly reactive resin with on-line mixing[J]. Composites: Part A, 2011,42(8): 1390-97.
[49]Mehammad S R, Wysocki M, Larsson R. Modeling of coupled dual-scale flow–deformation processes in compsoites producing[J]. Composites: Part A, 2013, 46:108-16.
[50]EW, Huang Z. Matching Conditions in atomistic-continuum modeling of materials[J].Physical Review Letters, 2001,87(13): 135501-04.
[51] Celia, MichaelA, Rajaram, Harihar, Ferrand, lin A·Multi-scalecomputational model for multiphase flow in porous meadia [ J]. Advances in Water Resources, 1993, 16(1): 81-92.
[52] P Raghavan, S Ghosh.·Current multiscale analysis of elastic composites by a multilevel computational modelMethods[J].Appl Mech Eng, 2004, 193(6-8): 497-538.
[53]Robert D.Crouch. Stephen B. Clay, Caglar Oskay. Experimental and computational investigation of progressive damage accumulation in CFRP composites[J]. Composites PartB, 2013, 48:59-67.
[54]Somnath Ghosh, Kyunghoon Lee1, Prasanna Raghavan.A multi-level computational model for multi-scale damage analysis in composite and porous materials[J]. International Journal of Solids and Structures, 2011, 38(14):2335-85.
[55] LQ Cao, JZ Cui. Asymptotic expan-sions and numerical algorithms of eigenvalues and eigenfunctions of the Dirichelt problems for second order elliptic equations in perforated domains [J]·NumerMath, 2004, 96(3): 525-81.
[56]US Department of Energy, National Energy Technology Laboratory, FY 2011 Vehicle Technologies Program[R], Funding Opportunity Number: DE-FOA- 0000239.
[57] Liang Yan(梁燕), Jin Liang(金亮), Pan Ding(潘鼎)等. 碳纤维低成本制备技术[J]. Hi-tech Fiber & Application(高科技纤维与应用),2011,36(3):39-44.
[58] Leon y leon, C.A. O Brien,R.A. McHugh,J.J, et al. Polyethylene and polypropylene as low cost carbon fiber precursors[C].33rd International SAMPE Technical Conference. Seattle 2001, (33):1289-96.
[59]Hunt, M. A., Saito, T., Brown, R. H., et al. Patterned functional carbon fibers from polyethylene[J]. Advanced Materials. 2012, 24(18): 2386-89.
[60]http://www.ornl.gov/.
[61] Dianel.GEE. Carbon fibers from electrospun polymeric phenolic resin precursors[D]. Virginia commonwealth University. 2003.
[62] H.dasarathy, W.C.Schniphf, S.B.Smith, et al. Low cost carbon fiber from radiated textile acrylics[R]. Baltimore MD: SAMPE, 2002.
[63] US invests in low cost carbon fibre production[J]. Reinforced plastics, 2012,JULY/AUGUST56(4) :16.
[64] Li Zhen(李禛). Study on New Type of Preoxidation Equip ment For Carbon Fiber Production Line(新型碳纤维生产线预氧化装置的研究)[D]. Ji Nan(济南): Shan Dong University(山东大学), 2007.
[65]Xu Haiping(徐海萍),Sun Yanping(孙彦平),Chen Xinmou(陈新谋). 射频等离子法PAN基预氧化纤维微观结构表征[J]. Chinese Science Bulletin(科学通报), 2003, (3): 9-12.
[66] Walczyk D, Kuppers J. Thermal press curing of advanced thermoset composite laminate parts[J]. Composites: Part A, 2012, 43(4): 635-46.
[67] T. Centea and P. Hubert. Measuring the impregnation of an out-of-autoclave prepreg by micro-CT[J]. Composites Science and Technology, 2011, 71(5): 593-99.
[68] Owen MJ, Middleton V, Hutcheon KF, et al. The development of resin transfer moulding (RTM) for volume manufacture[J]. Proc I Mech E Design Compos Mater , 1989:107-14.
[69] Rudd CD, Long AC, Kendall KN, etal. Liquid moulding technologies resin transfer moulding, structural reaction injection moulding and related processing techniques[C]. Cambridge England: Woodhead Publishing Limited:1997.
[70] Rudd CD, Owen MJ, Middleton V. Effects of process variables on cycle time during resin transfer moulding for high volume manufacturing[J]. Mater Sci Tech, 1990, 6(7):656-65.
[71] Rudd CD, Owen MJ, Middleton V, et al. Developments in resin transfer moulding for high volume manufacture[C]. In: 6th Annual ASM/ESD advanced composites conference,1990: 301-11.
[72] Masayoshi Kamiura. Toray’s Strategy for Carbon Fiber Composite Materials[C]. 3rd IT-2010Strategy seminar (Carbon Fiber Composite Materials) Presentation April, 2008.
[73] M.Yamasaki, S.Iwasawa, T.Sedido, et al. A rapid resin injection system for automobile members made by RTM process[C]. Proceedings of the twelfth US-Japan Conference on composites materials, 2006,475-84.
[74] T.kamae, G.Tanaka, H.oosedo. a rapid cure epoxy resin system for a RTM process[C]. Proceedings of the twelfth US-Japan Conference on composites materials, 2006,475-84.
[75] Deleglise M, Grognec P L, Binetruy C, et al. Modeling of high speed RTM injection with highly reactive resin with on-line mixing[J]. Composites: Part A, 2011, 42(10): 1390-97._nf19303ec7803449889b02a7172e020ed3
[76] Lin Jian-liang, Wen-Bin Y. The Effect of Preheater on the Resin Transfer Molding[J]. Journal of Reinforced Plastics and Composites, 1999, 18(10): 954-65.
[77] Johnson M S, Rudd C D. The Effect of Microwave Resin Preheating on the Quality of Laminates Produced by Resin Transfer molding [J]. Polymer Composites, 1997, 18(2): 185-97.
[78] Wen-Bin Y, Chaw-Wu T. study on the preheated temperatures and injection pressures of the RTM process[J]. Journal of Reinforced Plastics and Composites, 1994, 13(5): 467-83.
[79]Johnson M S, BS, MS, et al. Cycle time reductions in resin transfer moulding using micro wave preheating[J]. Proceedings of the Institution of Mechanical Engineering, Part B, 1995, 209(6): 443-54.
[80] Blanchard P J, Rudd C D. cycle time reduction of resin transfer molding by phased catalyst [J]. Composites Science and Technology, 1996, 56(2): 123-33.
[81] http://www.roctool.com.
[82] Shia-Chung Chen, Jen-An Chang, Su-Hsia Lin, et al. Mold Surface Heating Using High Frequency Induced Electromagnetic Proximity Effect[C]. The 7th International Conference on Advanced Molding and Materials Processing Technology. Hua zhong University of Science and Technology, Wuhan, China, Sept 10-12, 2010:287-91.
[83] Kim B. Method for rap id mold heating and cooling [ P ] : US, 6846445B2. 2005201225.
[84] Yao Donggang, Thomas E. Kimerling, Byung Kim. High-frequency proximity heating for injection molding applications[J]. Polymer Engineering and Science, 2006, 46(7) : 938-45.
[85] http://www.dieffenbacher.de/en
[86] Composites Europe highlights solutions for
mass productions of mass production , Reinforced
plastics[J], 2011 July/August:45-46.
[87] light weight automotive design With HP- RTM , Reinforced plastics[J], 2011 September / October:29-31.
[88] Chen Shiqing(陈石卿). 前景看好的高压RTM成形技术[J]. Aeronautical Sciense and Technology(航空科学与技术). 2010(5): 11-12.
[89] Binetruy C, Advani SG. Foam core deformation during liquid molding of sandwich structures: modeling and experimental analysis[J]. J Sandwich Structural Material,2003, 5(4):351-76.
[90] Deleglise M, Binetruy C, Krawczak P. Simulation of LCM processes involving induced or forced deformations[J]. Composites: Part A, 2006, 37(6):874-80.
[91] Wakeman MD, Zingraff L, Bourban P-E, et al. Stamp Forming of Carbon fibre/PA12 Composites – A Comparison of a Reactive Impregnation Process and a Commingled Yarn System[J]. Composites Science and
Technology, 2006, 66(1):19-35.
[92] Jun Yanagimoto, Katsuyoshi Ikeuchi. Sheet forming process of carbon fiber reinforced plastics for lightweight parts[J]. CIRP Annals-Manufacturing Technology,2012,61(1):247-50.
[93] Zhang Qi(张琦),Gao Qiang(高强),Zhao Shengdun(赵升吨)等. 碳纤维复合材料板热弯曲试验研究. Journal of Netshape Forming Engineering(精密成型工程). 2011,3(6):121-125.
[94] Corum J M, Battiste R L, Deng S, et al. Durability-based design properties of reference crossply carbon-fiber composite[J]. ORNL/ TM -2000/322.
[95] http://www.hexcel.com/Resources/Prepreg-Data- Sheets.
[96]Beardmore P, Johnson C F. The potential for
composites in structural automotive applications[J].
Composites Science and Technology, 1986, 26(4):
251-281.
[97] Zingraff L, Wakeman M D, Bernet N. Non-isothermal stamp forming of carbon/polamide 12 based composites[C]. Sccond Global Symposium on Innovations in Materials Processing and Manufacturing:Sheet Materials, New Orleans, LA, USA.2001:327—345.
[98] Breuer U, Neitzel M. Challenge of stamp forming high-strength thermoplastic composites for transportation[C]. In: Proceedings of the 42nd international SAMPE symposium and exhibition.
CA: Anaheim, 1997.
[99]N.Bernet, V.Michaud, P.E. Bourban, et al. Commingled yarn composites for rapid processing of complex shapes.Composites:PartA, 2001, 32(11): 1613-1612.
[100] Wakeman MD, Rudd CD. Compression moulding of thermoplastic composites. In: Kelly A, Zweben C, editors. Comprehensive composite materials[M], Oxford: Elsevier Science, 2000. 915–63.
[101] Allen BE. Characterization of reclaimed carbon fibers andtheir integration into new thermoset polymer matrices viaexisting composite fabrication techniques. [D], North Carolina State University, Raleigh, NC, USA, 2008.
[102] Pickering SJ. Recycling technologies for thermoset composite materials—current status[J]. Composites: Part A. 2006, 37(8): 1206-15.
[103] Jody BJ, Pomykala JA, Daniels EJ and Greminger JL. A process to recover carbon fibers from polymer matric composites in end-of-life vehicles[J]. J Mater, 2004, 56(8): 43-47.
[104] Ushikoshi K, Komatsu N, Suqino M. Recycling of CFRP by pyrolysis method[J]. J Soc Mater Sci, 1995, 44(499): 428-31.
[105] Meyer LO, Schulte K and Grove-Nielsen E. CFRP-recycling following a pyrolysis route: process optimization and potentials. Journal of Composite Materials . 2009, 43(9): 1121-32.
[106] P Feraboli H Kawakabi, B Wade. Recyclability and reutilization of carbon fiber fabric/epoxy composites[J]. Journal of Composite Materials, 2012, 46(12): 1459-73.
[107] Klaus Friedrich, Almajid A A. manufacturing aspects of advanced polymer composites for automotive applications[J]. Appl Compos Mater, 2012.