[1]张波 周宣 董龙龙 曹辉辉 张于胜.富氮网状核壳结构Ti6Al4V合金组织和力学性能研究[J].中国材料进展,2018,(07):021-25.
 ZHANG Bo ZHOU Xuan DONG Longlong CAO Huihui ZHANG Yusheng.Microstructure and Mechanical Properties of a High-Nitrogen Core-Shell Network Structured Ti6Al4V Alloy[J].MATERIALS CHINA,2018,(07):021-25.
点击复制

富氮网状核壳结构Ti6Al4V合金组织和力学性能研究()
分享到:

中国材料进展[ISSN:1674-3962/CN:61-1473/TG]

卷:
期数:
2018年第07期
页码:
021-25
栏目:
前沿综述
出版日期:
2018-07-31

文章信息/Info

Title:
Microstructure and Mechanical Properties of a High-Nitrogen Core-Shell Network Structured Ti6Al4V Alloy
作者:
张波1 周宣2 董龙龙2 曹辉辉3 张于胜2
(1.西安理工大学 材料科学与工程学院,陕西 西安 710048)
(2.西北有色金属研究院,陕西 西安 710016)
(3.太原理工大学 材料科学与工程学院,山西 太原 030024)
Author(s):
ZHANG Bo1 ZHOU Xuan2 DONG Longlong2 CAO Huihui3 ZHANG Yusheng2
(1. School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048, China)
(2. Northwest Institute for Nonferrous Metal Research, Xi’an 710016, China)
(3. School of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024,China)
关键词:
核壳结构TC4钛合金强度力学性能烧结
Keywords:
core-shell structured TC4 strength mechanical property sintering
文献标志码:
A
摘要:
采用放电等离子烧结(SPS)技术将经过高温渗氮处理的Ti-6Al-4V (TC4) 粉末制备成致密的核壳结构TC4。并对核壳结构TC4合金在1000°C下进行固溶处理,研究了不同速度冷却方式以及不同温度时效处理对核壳结构TC4合金微观组织和力学性能的影响。利用光学显微镜(OM)和扫描电子显微镜(SEM)对核壳结构TC4合金的显微组织和截面形貌进行分析。发现壳层具有接近单一的α相,而核心为α+β相,并且β相连续分布在α相之间,最终形成了这种新颖的核壳结构。在氮的固溶强化和核壳结构的双重作用下,核壳结构TC4合金屈服强度达1180MPa,断裂应变率约为10%,力学性能明显提高。通过固溶和时效处理调节壳和核的微观结构,可以进一步提高材料的性能。
Abstract:
Complete densified core-shell (CS) structured Ti-6Al-4V (TC4) compact was synthesized by powders nitriding and subsequent spark plasma sintering (SPS). The microstructure and mechanical properties of CS-TC4 after solution treatment and ageing were investigated. The cross-section microstructures of nitrided TC4 powder and sintered core-shell (CS) structured TC4 compact were characterized by optical microscopy (OM) and scanning electron microscope (SEM). The mechanical properties of compacts were also measured. Results show that the shell consists of near single α phase and the core is mainly composed of α laths and β lamellae. Phase transformation from (α+β) phase to a near single α phase in shell is attributed to the nitrogen diffusion, which results in such a novel CS structure. The CS -TC4 compact exhibits yield strength of about 1180 MPa and a fracture elongation of 10%. Such excellent mechanical properties should be attributed to the solid strengthening of nitrogen and the unique core-shell structure. The mechanical properties can be further enhanced through solution and aging treatment for a reasonable microstructure controlling.
更新日期/Last Update: 2018-06-28