[1]李硕,周梦然,付尤,等.铝合金及铝基复合材料搅拌摩擦增材制造研究进展与未来展望[J].中国材料进展,2026,45(12):080-89.
 LI Shuo,ZHOU Mengran,FU You,et al.Research Progress and Future Prospects of Friction Stir Additive Manufacturing of Aluminum Alloys and Aluminum Matrix Composites[J].MATERIALS CHINA,2026,45(12):080-89.
点击复制

铝合金及铝基复合材料搅拌摩擦增材制造研究进展与未来展望()

中国材料进展[ISSN:1674-3962/CN:61-1473/TG]

卷:
45
期数:
2026年12
页码:
080-89
栏目:
出版日期:
2026-11-30

文章信息/Info

Title:
Research Progress and Future Prospects of Friction Stir Additive Manufacturing of Aluminum Alloys and Aluminum Matrix Composites
作者:
李硕; 周梦然; 付尤; 董鑫泽; 等。
1 a.清洁高效透平动力装备全国重点实验室,清华大学机械工程系,北京,100084 2 西北工业大学材料学院,凝固技术全国重点实验室,陕西省摩擦焊接工程技术重点实验室,西安,710072
Author(s):
LI Shuo;  ZHOU Mengran;  FU You;  DONG Xinze; et al.
1.a. National Key Laboratory of Clean and High-efficiency Turbomachinery Power Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China 2.School of Materials Science and Engineering, National Key Laboratory of Solidification Technology, Shaanxi Key Laboratory of Friction Welding Engineering Technology, Northwestern Polytechnical University, Xi’an 710072, China
关键词:
增材制造; 搅拌摩擦固相增材制造; 铝合金; 铝基复合材料; 力学性能
Keywords:
additive manufacturing;  friction stir solid-state additive manufacturing (FSAM);  aluminum alloys;  aluminum matrix composites;  mechanical properties
文献标志码:
A
摘要:
搅拌摩擦增材制造(Friction stir additive manufacturing, FSAM)技术基于摩擦热和剧烈塑性变形实现金属材料的逐层固态沉积,因避免了熔化-凝固过程,在制备高裂纹敏感性铝合金及铝基复合材料方面展现出独特优势。本文系统综述了铝合金及铝基复合材料搅拌摩擦固相增材制造的研究进展。首先,梳理了AFSD、S-FSAM、W-FSAM、P-FSAM、FSPAM和FRAM六种工艺变体的原理、特征与最新进展;其次,按合金系列分类总结了铝合金以及铝基复合材料在固相增材制造过程中的组织演化与性能特征,重点阐述了各系的核心问题、工艺差异及力学表现范围;进而从力学行为、组织状态和析出物行为三个维度系统分析了微观机理;最后,讨论了当前工艺在沉积态强度恢复、性能各向同性调控、增强相均匀分散及在线监测等方面面临的挑战,并展望了材料性能-结构-功能一体化的发展趋势。
Abstract:
Friction stir additive manufacturing (FSSAM, hereafter referred to as FSAM) enables the layer-by-layer deposition of metallic materials in the solid state by virtue of frictional heating and severe plastic deformation. Because the melting–solidification cycle is entirely circumvented, this route offers distinctive advantages for producing aluminum alloys with high hot-cracking susceptibility and aluminum matrix composites. This review presents a comprehensive account of recent progress in friction stir solid-state additive manufacturing of aluminum alloys and aluminum matrix composites. The operating principles, characteristic features and state-of-the-art developments of six process variants—AFSD, S-FSAM, W-FSAM, P-FSAM, FSPAM and FRAM—are first surveyed. The microstructural evolution and mechanical performance of aluminum alloys, organized by alloy series, and of their composites are then summarized, with particular emphasis on the issues specific to each alloy system, the differences arising from the processing variant, and the ranges of mechanical response attained. The underlying mechanisms are subsequently analyzed from three interrelated standpoints: mechanical behavior, microstructural state and precipitate behavior. Finally, prevailing challenges are discussed, including strength recovery in the as-deposited condition, control of property isotropy, homogeneous dispersion of the reinforcing phase and in-situ monitoring, and future perspectives are outlined toward the integrated design of material performance, structure and functionality.
更新日期/Last Update: 2026-11-02